This page will walk you through the steps for setting To set up your VZ Bike Controller for use with PC, PlayStation 4, or mobile VR.
...
the first time, remove it from its packaging and follow the instructions in the printed manual that came with
...
it (which you can also find here in PDF format). Please make special note of the following:
- The left pedal must be screwed on counterclockwise. Attempting to screw it in clockwise can damage it!
...
Make sure you can make a Bluetooth connection with the bike. Are you on PC, PS4, or mobile?
On PC or PS4: Look inside the battery compartment for your USB Bluetooth dongle, and plug this into a USB port now.
On mobile: You don't need to use the USB Bluetooth dongle that comes in the battery compartment of your bike; as long as you never deliberately disabled Bluetooth on your smartphone, your phone will automatically detect the bike's Bluetooth signal.
...
Insert 2 AA batteries and switch on the bike.
...
- The USB Bluetooth dongle is taped to the inside of your battery compartment.
- The LED light on your VZ Bike does not necessarily turn on just because you turn the bike on. It turns on when the bike connects to VirZOOM ready games.
- Missing parts are extremely rare, but if you find this is the case with your bike, please contact us at support@virzoom.com and report...
- which parts are missing
- your shipping address
- your bike serial number (printed on sticker inside the battery compartment)
- your order number from our website, or a copy of your receipt if purchased from another retailer
Once you finish with assembly, your bike is ready to use with VirZOOM games! If you haven't yet installed VirZOOM Arcade, our free collection of exercise games, check out our Setup Guide for instructions specific to your VR platform.