Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Problem

You flip the power switch on the VirZOOM Bike Controller to "On," but you don't see the light on the bike turn on.

Solution 1

The light may only turn on if you turn on the bike while playing our collection of games, VirZOOM Arcade. (The light stays off if it's not making an active Bluetooth connection to your PC or PS4.) If you haven't yet installed VirZOOM Arcade, try these steps: 

  1. Follow the steps at our Setup page to install VirZOOM Arcade
  2. Plug the USB Dongle into your PC or PS4. 
  3. Try a new set of batteries, with negative pointed towards the spring. 
  4. Make sure your VirZOOM bike is switched on. 
  5. Turn the resistance knob to 1. 
  6. Launch VirZOOM Arcade. 
  7. Check the light on the bike.

If the light is on, everything is working as expected. If not, read on.


Solution 2


It's possible the issue is with light itself, but the bike is still powered on. At the end of the steps listed above, check your screen while running VirZOOM Arcade. 

If the message on screen does not say "No bike detected," then your bike is working but the light is not. If you prefer a bike with a working light and your bike is still under warranty, you may contact us at support@virzoom.com to arrange for a replacement part.

If the message on the screen does say "No bike detected" and the green light on the bike isn’t lit or flashing, then try pushing a handlebar button. If that doesn't wake up the bike, or if you get some other error message, your bike may not be able to power on. If your bike is still under warranty, you may contact us at support@virzoom.com to arrange for a replacement part.



  • No labels